CF2000 – Entry level addressable fire alarm system panel
The Cooper CF2000 fire panel is an entry level addressable control panel that can be configured for either 1 or 2 loop operation. It serves as the optimum solution for buildings that require a simple to use addressable fire system with a single, non-networked panel.
Its ability to support Eaton’s cause and effect programming and a wide range of user-controllable functions make the panel suitable for a varied range of projects from small warehouses to small/medium office developments as well as many small industrial applications all over India .
As with all Eaton addressable panels, the CF2000 uses “spur tolerant” soft addressing to minimize installation time and remove potential for errors often associated with many forms of manual addressing. The fire panel also has an LCD display which provides a simple yet comprehensive, menu-driven, end-user interface .
- Ideal for smaller fire system projects, the CF2000 leads to faster installation and ease of panel management as only one panel is required. For larger fire system projects a CF3000 networkable panel may be more suitable.
- Conventional systems limitations can be overcome using an addressable system: Fire detectors or call points are electronically coded with a unique identification (i.e. ‘address’) that’s programmed to the device during installation, leading to ease of device identification in event of activation.
- With ’cause and effect’ programming the system can be programmed exactly how you want it, reducing ‘false alarm’ scenarios if, for example, single devices are activated in a particular area.
The easy choice for ‘one panel’ addressable fire systems
|Standards:||EN54 Pt2 1997, A1:2006 EN54-4 1997, A1: 2002 & A2: 2006|
|Number of Loops:||2|
|Addresses per Loop:||200|
|Panel sounder circuits:||4 outputs 1A total (programmed in pairs – outputs 1&2, 3&4)|
|Class change facility:||Operated by external, normally open, volt free contacts|
|Auxiliary relay:||One set of change over contacts, operated in the event of fire activation|
|Auxiliary fire routing equipment output:||Monitored 24Vdc, 30 mA (max)|
|Auxiliary fire protection equipment output:||Monitored 24Vdc, 30 mA (max)|
|Auxiliary Fault routing equipment output:||Monitored 12Vdc, 30 mA (max)|
|Output ports:||RS485 and RS232 (for connection of repeaters etc)|
|Mains input voltage:||230Vac +10% / -15%|
|System operating voltage:||24Vdc|
|Batteries:||2 x 12V 7Ah|
|Standby Duration:||24 hours (dependant on loop loading)|
|Operating Temperature:||-5˚C to 40˚C|
|Humidity (Non-condensing):||0 to 93% (+2/-3%) RH|
|Construction:||Back Box – Mild Steel
Door – PC / ABS
|Dimensions (HxWxD):||400mm x 320mm x 170mm|
|Weight (with batteries):||15kg|
|Cable Entry:||Top: 20 cable entry knockouts (20mm)
Bottom: 4 cable entry knockouts
Rear: 3 cable entry knockouts & cut-out (125mm x 18mm)